What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC800805CXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC800805CXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC800805CXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC800805CXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7999
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-7999 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S flame sensor is a genuine OEM component for the AMVC800805CXAA gas furnace and compatible Goodman and Amana models. This flame rod uses flame rectification to confirm that the burners have actually lit; if the control board does not sense a proper flame signal within a few seconds of ignition, it shuts off the gas valve as a safety measure. A dirty, oxidized, or cracked flame sensor is one of the most common causes of a furnace that lights briefly and then shuts down, short cycles, or throws a flame-sense fault code.

Genuine OEM Goodman part number 0130F00010S
Flame rectification sensor (flame rod)
Resolves short-cycling and no-heat flame faults
Fits AMVC800805CXAA and compatible furnaces
Stainless-steel sensing rod with ceramic insulator
Direct-fit mounting and terminal connection

OEM vs. Generic

The OEM 0130F00010S is built with the correct rod length, insulator, and bracket geometry to sit properly in the burner flame and produce a reliable microamp signal. Generic sensors can vary in rod placement and material quality, leading to weak flame signals and recurring lockouts. For consistent ignition, genuine OEM is the better long-term value.

Installation Difficulty

Easy. Shut off power, remove the single mounting screw, unplug the wire terminal, and install the new sensor in the same position — making sure the rod sits directly in the burner flame path. Avoid touching the rod with bare fingers. The job takes about 10–15 minutes and is one of the most satisfying DIY furnace repairs. Tip: if a sensor is only lightly fouled, gentle cleaning can help, but a cracked insulator always warrants replacement.

Compatible with Goodman/Amana AMVC800805 furnaces. Verify your OEM part number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC800805CXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC800805CXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC800805CXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu