What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC800805CNAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC800805CNAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC800805CNAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC800805CNAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7991
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-7991 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The genuine OEM Goodman 0130F00010S flame sensor is the flame-rectification rod for the AMVC800805CNAB 80% AFUE two-stage furnace. It confirms the burner has lit by passing a small microamp current through the flame; when that signal weakens from oxidation or carbon buildup, the control board can no longer prove flame and shuts the gas valve. The classic symptom is a furnace that lights, runs a few seconds, then drops out and re-tries — repeated short-cycling and eventual lockout. Installing a clean OEM sensor is the most common fix for flame-loss faults.

Specifications

OEM Part Number: 0130F00010S
Category: Flame Sensor / Ignition
Compatible Model: AMVC800805CNAB (Goodman/Amana 80% two-stage furnace)
Type: Single-rod flame rectification sensor with ceramic insulator
Fit Type: Direct OEM replacement

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, bend, and insulator rating so the sensing rod sits properly in the flame envelope. Generic rods that sit too high or low give erratic microamp readings and can mimic the very fault you are trying to fix. For a sensing component, the factory geometry matters.

Installation Difficulty

Easy — typically one screw and a single spade connector. Shut off power, remove the old sensor, seat the new one, and reconnect. Do not sand a brand-new sensor. Verify a steady flame and no short-cycling on the first heat call.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC800805CNAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC800805CNAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC800805CNAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu