What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMVC800804CNAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC800804CNAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMVC800804CNAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMVC800804CNAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7957
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-7957 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the AMVC800804CNAB two-stage variable-speed 80% AFUE gas furnace and related AMVC8/GMVC8 models. The flame sensor confirms the burner has lit by conducting a micro-amp rectified current through the flame; if the control board doesn't sense that current, it shuts off the gas valve for safety. A dirty or failed flame sensor is the single most common cause of a furnace that lights then shuts down after a few seconds (short-cycling on flame loss).

Specifications

Part Type: Flame sensor / flame-rectification rod
Signal: Micro-amp DC flame current (typ. 1–6 µA)
Fits: Goodman/Amana AMVC800804CNAB and related AMVC8 furnaces
Mount: Single-screw burner-bracket, spade terminal
Type: OEM exact-fit replacement

OEM vs. Generic

This genuine Goodman sensor uses the correct rod length, alloy, and ceramic insulator so it sits in the proper flame envelope and reads a stable signal. Generic sensors may sit too shallow, read low micro-amps, and cause intermittent lockouts. For a reliable flame signal, OEM is the safe choice.

Install Difficulty: Easy

A 10-minute repair. Kill power, remove one screw, pull the spade connector, install the new sensor, and reconnect. Tip: if you're already in there, gently clean any residue and verify the flame current reads within spec after restart.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMVC800804CNAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMVC800804CNAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMVC800804CNAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu