What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMSS960804CNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMSS960804CNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMSS960804CNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMSS960804CNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7553
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-7553 Brand: Goodman

$34.95 $45.99

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for Goodman and Amana AMSS960804CNAA gas furnaces. Positioned in the burner flame, it passes a small microamp current to the control board to prove that ignition actually occurred. When the rod becomes oxidized or coated, that signal drops and the board — reading no flame — closes the gas valve as a safety measure. The result is the most common furnace complaint on the planet: burners that light for a few seconds, then drop out, sometimes ending in a hard lockout and no heat.

Specifications

Part type: Flame sensor / flame-rectification rod
Function: Proves burner flame via microamp signal to the control board
OEM part number: 0130F00010S
Fits: Goodman/Amana AMSS960804CNAA and compatible 96% AFUE furnaces
Mounting: Single-screw bracket with quick-connect lead

OEM vs. Generic

Flame sensing is a precision measurement in the range of just a few microamps. Generic rods with the wrong alloy, tip length, or insulator position can read low from day one, causing intermittent dropouts that are maddening to diagnose. The genuine 0130F00010S delivers the exact rod geometry and material the control board expects, restoring a strong, stable flame signal.

Install Difficulty

Easy (2/5) — Turn off power and gas, remove the single mounting screw, unplug the sensor lead, and install the replacement. Avoid touching the new rod with bare fingers, and route the wire clear of the burners. A cheap upgrade that resolves a large share of short-cycling calls.

In stock and ready to ship. OEM fit guaranteed.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMS...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMSS960804CNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMSS960804CNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMSS960804CNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu