What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS81205DXAC Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS81205DXAC Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMS81205DXAC Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMS81205DXAC Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7226
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-7226 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is the genuine OEM flame-rectification rod for the Amana/Goodman AMS81205DXAC gas furnace. It confirms the presence of a burner flame and signals the control board to keep the gas valve open. A dirty, corroded, or failed sensor is the single most common cause of a furnace that lights and then shuts off within a few seconds (short-cycling on flame loss).

This exact-fit sensor uses the original rod length, ceramic insulator, and mounting bracket, so it drops straight into the burner assembly and reads a correct microamp signal out of the box.

Specifications

OEM Part Number: 0130F00010S
Fits: Amana / Goodman AMS81205DXAC gas furnace
Type: Single-rod flame rectification sensor
Mount: OEM bracket & spade terminal
Common fault codes: flame not sensed / ignition lockout

OEM vs. Generic

Universal flame sensors often need the rod bent or the bracket adapted, and inconsistent microamp output can trigger nuisance lockouts. This OEM part reads to factory spec immediately — the reliable choice for a furnace that stays lit.

Installation Difficulty

Easy. Kill power, remove one screw, unplug the spade terminal, and swap. A confident DIYer can complete it in about 10–15 minutes. Do not sand a new sensor; install it clean.

Fits Amana and Goodman units on the AMS81205 platform. Verify your part number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMS...

$22.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS81205DXAC Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS81205DXAC Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS81205DXAC Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu