What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS81155CNAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS81155CNAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMS81155CNAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMS81155CNAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7177
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-7177 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman/Amana 0130F00010S is a genuine OEM flame sensor (flame-rectification rod) for the AMS81155CNAA 80% AFUE gas furnace and compatible Goodman/Amana models. The sensor proves that a flame is present after ignition; when its metal rod becomes oxidized or cracked, the control board loses the microamp flame signal and shuts the gas valve — producing the classic symptom of the burners lighting and then dropping out after a few seconds (short cycling or ignition lockout).

Specifications

Function: Flame rectification / proving
Element: Kanthal sensing rod with ceramic insulator
Mount: Single-screw bracket, spade terminal
Fits: AMS81155CNAA and related Goodman/Amana furnaces
Replaces: Worn or fouled OEM flame rods

OEM vs. Generic

The OEM 0130F00010S uses factory-spec rod alloy and insulator geometry so it develops the correct flame current the AMS81155CNAA control board expects. Generic sensors may fit physically but can produce a weak or unstable microamp signal, causing intermittent lockouts. For reliable ignition proving, install the OEM part.

Installation Difficulty: Easy (2/5)

Cut power at the disconnect, remove the single mounting screw, unplug the wire, and reverse to install — keep the rod out of the flame's inner cone and away from ground. A light polish of a still-good rod can help, but a cracked or heavily eroded sensor should be replaced. Confirm a stable flame signal and normal heat cycle after service.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS81155CNAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS81155CNAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS81155CNAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu