What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS80904BNAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS80904BNAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMS80904BNAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMS80904BNAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-7066
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-7066 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Restore reliable heating with the genuine Goodman 0130F00010S Flame Sensor, a factory replacement for the Goodman/Amana AMS80904BNAA gas furnace and compatible models. The flame sensor (flame rod) confirms that the burner has actually lit by reading a micro-amp rectification current through the flame. When the rod becomes coated or oxidized, the control board can't verify flame and shuts the gas valve — causing the furnace to ignite briefly, then drop out and short-cycle.

Part number: 0130F00010S
Function: Flame rectification / proving
Signal: Micro-amp DC flame current
Fits: Goodman/Amana AMS80904BNAA and compatible furnaces
Construction: Kanthal sensing rod with ceramic insulator

OEM vs. Generic: This genuine OEM sensor is built with the correct rod length, mounting bracket, and terminal to seat perfectly in your burner assembly. Generic sensors may fit loosely or position the rod incorrectly in the flame, producing a weak signal and repeat failures. OEM ensures a strong, stable flame current the first time.

Install difficulty: Easy. A single mounting screw and a push-on wire connector are usually all that's involved, typically a 10–15 minute job. Shut off power and gas first. If the sensor is simply dirty, light polishing with fine steel wool or emery cloth can extend its life, but a worn rod should be replaced.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS80904BNAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS80904BNAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS80904BNAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Goodman Flame Sensor for AMS80904BNAA Furnace — 0130F00010S

Shipping Information

Return Policy

Frequently Asked Questions