What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS80704BXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS80704BXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMS80704BXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMS80704BXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6939
Price: 29.95 USD
Availability: InStock

SKU: GOODMAN-6939 Brand: Goodman

$29.95 $39.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-proving rod for the AMS80704BXAA and compatible Goodman/Amana gas furnaces. It uses flame rectification to confirm the burners have actually lit; if the control board doesn't sense a valid flame current within a few seconds of ignition, it closes the gas valve as a safety measure.

A dirty, oxidized, or cracked flame sensor is one of the most common causes of furnace short-cycling — the burners light, then shut off seconds later, sometimes repeating until the furnace locks out. When cleaning the old rod no longer restores a stable flame signal, replacing it with the OEM part is the reliable fix.

Specifications

OEM Part Number: 0130F00010S
Part Type: Flame sensor / flame-rectification rod
Function: Proves burner flame, enables safe gas-valve operation
Signal: Microamp flame current to the ignition control board
Compatible Model: AMS80704BXAA

OEM vs. Generic

Genuine OEM flame sensors provide a consistent, in-spec microamp signal and use the correct rod length and mounting for the AMS80704BXAA burner box. Generic sensors may sit at the wrong flame position or produce a weak signal, leading to continued lockouts. For a dependable safety component, OEM is the recommended choice.

Installation Difficulty

Easy (2/5). Shut off power and gas, remove the single mounting screw at the burner assembly, disconnect the wire lead, and install the new sensor. Avoid touching the rod with bare fingers. Restore power and confirm the burners light and stay lit. Most homeowners can complete this repair in about 15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMS...

$29.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS80704BXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS80704BXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS80704BXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu