What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS80704BNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS80704BNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMS80704BNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMS80704BNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6919
Price: 39.95 USD
Availability: InStock

SKU: GOODMAN-6919 Brand: Goodman

$39.95 $52.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification sensor for the AMS80704BNAA gas furnace and compatible Goodman/Amana models. Positioned in the burner flame, this sensor confirms to the control board that ignition has occurred by passing a small microamp rectified current. When the sensor becomes coated with oxide or fails, the board can't prove flame and shuts the gas valve — producing the classic symptom of a furnace that lights, runs for a few seconds, then shuts off and short-cycles or locks out on a no-heat fault.

Specifications

OEM Part Number: 0130F00010S
Type: Flame-rectification sensor (flame rod)
Function: Proves burner flame to the ignition control
Fits: Goodman & Amana AMS80704BNAA and compatible furnaces
Signal: Microamp flame-rectification current

OEM vs. Generic

This genuine OEM sensor matches Goodman's exact rod length, ceramic insulator, and bracket geometry, so it seats correctly in the flame envelope and delivers a reliable microamp signal. Generic sensors may sit too far from the flame or produce a weak signal, causing intermittent lockouts. For dependable ignition and correct flame-proving, OEM is the right choice.

Install Difficulty: Easy

Rated Easy (1/5). Shut off power, remove the single mounting screw, unplug the wire lead, and swap in the new sensor — most installs take under 10 minutes. Tip: lightly clean the burner and inspect wiring while access is open. Restore power and confirm a steady flame with no short-cycling.

Verify your model and part number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMS...

$39.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS80704BNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS80704BNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS80704BNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu