What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMS80403AXAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMS80403AXAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMS80403AXAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMS80403AXAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6711
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-6711 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The 0130F00010S Flame Sensor is the genuine OEM flame-rectification rod for the Goodman/Amana AMS80403AXAB gas furnace and matching 80% AFUE units. This sensor confirms flame presence during ignition — if the control board does not detect microamp current from the rod, it shuts the gas valve to prevent unburned fuel. A dirty or failed flame sensor is the single most common cause of furnace short cycling and intermittent no-heat lockouts.

Specifications

OEM Part Number: 0130F00010S
Category: Flame Sensor / Rectification Rod
Compatible Model: AMS80403AXAB and related Goodman/Amana furnaces
Function: Flame-presence detection via microamp signal
Construction: Kanthal sensing rod with ceramic insulator

OEM vs. Generic

Genuine Goodman sensors use precision rod length and insulator geometry so the flame fully envelops the tip for a stable signal. Generic rods may sit too high or low in the burner flame, producing a weak signal and nuisance faults even when clean. OEM is the reliable choice for a safety-critical sensor.

Installation Difficulty

Rating: Easy. Turn off power, remove one mounting screw, unplug the sensor lead, and swap. Total time is typically under 15 minutes. A quick microamp check with a meter confirms a healthy signal after install.

Ships as a genuine OEM Goodman replacement.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMS80403AXAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMS80403AXAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMS80403AXAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu