What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH81405DNAC — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH81405DNAC — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH81405DNAC — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH81405DNAC — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6147
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-6147 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

OEM Goodman 0130F00010S Flame Sensor

This genuine Goodman/Amana 0130F00010S flame sensor is the factory rectification rod for the AMH81405DNAC gas furnace and many compatible Goodman/Amana models. The sensor confirms a flame is present after ignition; when the rod becomes coated with oxide or the microamp signal drops, the control board shuts the gas valve and your furnace short-cycles — lighting for a few seconds, then dropping out. Installing the correct OEM sensor restores a clean flame-rectification signal and steady heating cycles.

Function: Flame rectification / proof-of-flame
Rod: Kanthal-style sensing element
Connector: OEM spade terminal, direct fit
Fits: AMH81405DNAC and compatible Goodman/Amana furnaces
OEM Part #: 0130F00010S

OEM vs. Generic

Aftermarket flame rods may sit at a slightly different height or angle in the flame, producing a weak or unstable microamp reading that trips intermittent lockouts. This OEM Goodman sensor uses the exact rod geometry and mounting for the AMH8 burner box, so it reads a strong, stable signal right out of the box.

Installation Difficulty: Easy

Turn off power, remove the single mounting screw, pull the spade connector, and install the new sensor. Avoid touching the rod with bare fingers. A five-minute job for most DIYers — often the cheapest fix for a short-cycling furnace.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH81405DNAC — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH81405DNAC — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH81405DNAC — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu