What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH81405DNAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH81405DNAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH81405DNAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH81405DNAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6135
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-6135 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

OEM Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor engineered for the AMH81405DNAB gas furnace and other compatible Goodman/Amana models. The flame sensor confirms the presence of a burner flame during each ignition cycle; when it fails or becomes coated with oxide, the control board shuts down the burners as a safety measure, causing short-cycling, no-heat calls, or a furnace that lights and then quickly drops out. Replacing a worn or corroded sensor restores dependable flame rectification and steady heating.

OEM Part Number: 0130F00010S
Compatible Model: AMH81405DNAB (Amana/Goodman 80% gas furnace)
Function: Flame rectification / flame proving
Material: Kanthal rod with ceramic insulator
Equipment Type: Furnace

OEM vs. Generic

This is a factory OEM sensor with the correct rod length, mounting bracket, and terminal for a true drop-in fit — no bending or adapting required. Aftermarket generics may cost less but often use thinner rods that oxidize faster and can seat incorrectly, leading to weak microamp signals and repeat failures. For a safety-critical flame-proving component, OEM is the reliable choice.

Installation Difficulty

Easy (1/5). Cut power at the furnace disconnect, remove the single mounting screw, unplug the spade connector, and install the new sensor. Most homeowners complete this in under 15 minutes. Always shut off gas and power before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH81405DNAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH81405DNAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH81405DNAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu