What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH81205DXBB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH81205DXBB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH81205DXBB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH81205DXBB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6116
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-6116 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification sensor that verifies burner flame presence on the Amana/Goodman AMH81205DXBB gas furnace and compatible AMH8-series models. When the flame rod becomes oxidized or cracked, the control board can no longer confirm ignition and shuts the gas valve — causing short-cycling, no-heat, or lockout faults. Replacing this inexpensive sensor is one of the most common fixes for a furnace that lights then drops out after a few seconds.

Specifications

Part Number: 0130F00010S
Category: Flame Sensor / Flame Rectification Rod
Fits: AMH81205DXBB and compatible AMH8-series furnaces
Function: Micro-amp flame current verification for the ignition control
Type: Genuine OEM direct replacement

OEM vs. Generic

The OEM 0130F00010S delivers the correct rod length, insulator, and mounting bracket so flame signal (microamps) reads within spec on the first startup. Generic sensors often sit too far from the flame or use lower-grade insulators that fail early, leading to repeat nuisance lockouts. For a reliability-critical safety component, the genuine part pays for itself.

Installation

Difficulty: Easy (1/5). A single-screw swap with one spade connector. Power down the furnace, remove the old sensor, install the new rod, and reconnect the wire. Avoid touching the rod with bare fingers — oils shorten sensor life. A light abrasive cleaning of the wire terminal is recommended during install.

Genuine Goodman OEM quality, in stock and ready to ship.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH81205DXBB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH81205DXBB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH81205DXBB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu