What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH81155CNAC Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH81155CNAC Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH81155CNAC Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH81155CNAC Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-6019
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-6019 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame rod for the AMH81155CNAC gas furnace and compatible Goodman/Amana models. The flame sensor confirms the burners have lit by carrying a tiny rectified microamp current through the flame. When the sensor is coated or corroded, the control board can't verify flame and shuts the gas valve — causing the furnace to light briefly then short cycle.

Specifications

Part Number: 0130F00010S
Type: Flame sensor / flame rectification rod
Element: Kanthal sensing rod, ceramic-insulated base
Signal: Microamp flame-rectification current
Fits: AMH81155CNAC and related Goodman/Amana furnaces

OEM vs. Generic

This OEM Goodman flame sensor is built to the correct rod length and mounting angle so the tip sits properly in the flame envelope, producing a strong, stable microamp signal. Generic sensors with the wrong rod geometry can read weak flame current and trigger nuisance lockouts. For consistent, safe operation, OEM matters.

Installation Difficulty

Easy (1/5). Shut off power, remove the single mounting screw, disconnect the wire, and swap in the new sensor. Route the rod so it crosses the burner flame without touching metal. If you're troubleshooting short cycling, try gently cleaning the old rod with fine emery cloth first — but a corroded sensor should simply be replaced.

All parts are sold new. Verify your model and serial number before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH81155CNAC Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH81155CNAC Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH81155CNAC Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu