What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH81005CXBB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH81005CXBB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH81005CXBB — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH81005CXBB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5973
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-5973 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S Flame Sensor is the factory flame-rectification rod for the Goodman/Amana AMH81005CXBB gas furnace and compatible 80% AFUE models. This sensor confirms the presence of a burner flame during each heating cycle; if it fails to detect flame, the control board closes the gas valve within seconds as a safety measure. A dirty, corroded, or failing flame sensor is the single most common cause of furnace short-cycling and no-heat lockouts.

Specifications

Type: Flame rectification sensor rod
Function: Verifies burner flame; enables safe gas-valve operation
Signal: Microamp flame current to the ignition control board
Fits: Goodman/Amana AMH81005CXBB and related furnaces
Part number: 0130F00010S (OEM)

OEM vs. Generic

The OEM 0130F00010S has the correct rod length, ceramic insulator, and bracket angle to sit precisely in the burner flame — critical for a stable microamp signal. Generic rods often produce a weak or erratic flame current, leading to intermittent lockouts. OEM is recommended; a tested equivalent is offered for budget repairs.

Installation Difficulty

Easy (1/5). One mounting screw and one push-on wire terminal. Power off at the breaker first. Tip: before replacing, try gently cleaning the rod with fine emery cloth — many "failed" sensors are simply coated in oxide.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH81005CXBB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH81005CXBB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH81005CXBB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu