What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80904BXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80904BXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH80904BXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH80904BXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5803
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-5803 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor (flame rod) for the AMH80904BXAA gas furnace and compatible Goodman/Amana models. After ignition, the sensor's rod sits in the burner flame and passes a small rectified microamp signal back to the control board, confirming a flame is present. If the board does not sense flame, it shuts the gas valve for safety — so a dirty or failed sensor is a leading cause of furnaces that ignite then shut off (short-cycling).

This exact-fit sensor mounts to the burner assembly with the OEM bracket and plug, restoring reliable flame proving.

Specifications

OEM Part Number: 0130F00010S
Type: Flame sensor / flame rectification rod
Signal: Microamp flame-rectification circuit
Fits: AMH80904BXAA and compatible Goodman & Amana furnaces
Connection: OEM spade/plug terminal

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, alloy, and bracket geometry so the tip sits properly in the flame for a strong, stable signal. Generic rods can sit at the wrong depth or corrode faster, causing weak flame signal and repeat lockouts. For a reliable flame-proving repair, OEM is the safe choice.

Installation Difficulty

Easy (1/5). Remove the burner panel, unplug the wire, remove one screw, and install the new sensor — often paired with a light cleaning of the surrounding area. Typical install time under 10 minutes. Shut off power before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80904BXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80904BXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80904BXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu