What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80903BXCB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80903BXCB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH80903BXCB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH80903BXCB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5749
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-5749 Brand: Goodman

$34.95 $45.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for Amana/Goodman AMH80903BXCB gas furnaces. The flame sensor confirms to the control board that a flame is present after ignition. When the rod becomes coated with oxide or fails, the board can't verify the flame and shuts the gas valve within seconds — producing the classic symptom of a furnace that lights, runs briefly, then short-cycles or locks out. Replacing a worn sensor restores reliable, uninterrupted heating.

Specifications

Type: Flame sensor / flame-rectification rod
OEM Part Number: 0130F00010S
Function: Confirms flame presence to ignition control
Fits: Goodman & Amana AMH80903BXCB and compatible furnaces
Material: High-temperature Kanthal-style rod with ceramic insulator
Mounting: Single-screw, factory bracket

OEM vs. Generic

Flame sensors rely on a precise microamp signal to the control board. This genuine OEM rod delivers the correct rod length, alloy, and insulator rating for a stable flame signal. Generic sensors often produce weak or erratic signals, leading to intermittent lockouts. For a component this central to reliable ignition, OEM is the recommended choice.

Installation Difficulty

Easy (1 of 5). Cut power, remove one screw, unplug the lead, and install the new sensor — position the rod in the burner flame path. Avoid touching the rod with bare fingers. If short cycling persists, verify the ground and control board.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80903BXCB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80903BXCB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80903BXCB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu