What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80903BXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80903BXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH80903BXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH80903BXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5725
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-5725 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement for AMH80903BXAA 80% AFUE gas furnaces. The flame sensor is the safety component that confirms the burner has lit by detecting the flame's ionization current. When it becomes coated with oxide or carbon, the furnace lights briefly and then shuts down on a flame-loss fault — one of the most common no-heat callbacks. Installing this exact-fit rod restores dependable ignition and continuous burner operation.

Specifications

OEM Part Number: 0130F00010S
Component: Flame sensor / flame rod
Fits: Goodman & Amana AMH80903BXAA furnaces
Equipment: 80% AFUE gas furnace
Material: High-temp stainless steel sensing rod with ceramic insulator
Connection: Single-wire spade terminal

OEM vs. Generic

Our OEM option is the factory Goodman/Amana part, guaranteeing correct rod length, mounting-bracket geometry, and terminal placement for a true drop-in fit. The Generic equivalent is an aftermarket sensor built to matching dimensions at a lower price point — a solid budget choice, though we recommend OEM for warranty-sensitive repairs.

Installation Difficulty

Easy (1/5). Cut power at the furnace switch, remove the single mounting screw and wire, and swap the sensor. Cleaning tip: a light pass with fine abrasive pad before install extends service life. Typical time: under 10 minutes with a nut driver.

Always disconnect power before servicing. If the fault persists after replacement, inspect the burner ground and control board.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80903BXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80903BXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80903BXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu