What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80704BNAC — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80704BNAC — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH80704BNAC — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH80704BNAC — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5363
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-5363 Brand: Goodman

$34.95 $46.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor for the Amana AMH80704BNAC 80% AFUE gas furnace and compatible Goodman/Amana models. This single-rod sensor uses flame rectification to prove the burners have lit, sending a small microamp signal back to the control board. When the rod becomes coated with oxide or carbon, the signal weakens and the board shuts the gas valve for safety — the classic symptom is a furnace that lights for a few seconds then shuts off and re-tries (short-cycling on flame failure).

Specifications

Type: Single-rod flame sensor (flame rectification)
Signal: Microamp flame-proving current
Connector: OEM spade terminal with mounting bracket
Material: High-temperature sensing rod
Fits: Amana AMH80704BNAC and compatible Goodman 80% furnaces

OEM vs. Generic

The genuine OEM 0130F00010S matches the exact rod length, bracket geometry, and terminal this burner assembly requires, so it seats in the flame at the correct depth for a strong, stable signal. Generic sensors may sit too shallow or use the wrong bracket, causing weak flame current and continued lockouts. For reliable flame proving, the direct-fit OEM part is recommended.

Installation Difficulty: Easy

Rated Easy (1/5). Power down the furnace, pull the spade connector, remove one screw, and install the new sensor in the same position. Takes about 10 minutes — one of the simplest furnace repairs.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80704BNAC — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80704BNAC — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80704BNAC — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu