What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80704BNAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80704BNAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH80704BNAB — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH80704BNAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-5351
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-5351 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement rod designed for the AMH80704BNAB gas furnace and numerous compatible Goodman and Amana units. If your furnace lights briefly then shuts down, short-cycles, or trips a flame-loss fault, a dirty or failed flame sensor is the most common culprit — and this OEM part is the fix.

Specifications

Type: Flame Sensor / Flame Rod
Signal: Microamp flame rectification
Part Number: 0130F00010S
Fits: AMH80704BNAB and compatible Goodman/Amana furnaces
Equipment: Gas Furnace
Includes: Sensor with mounting bracket and terminal

OEM vs. Generic

Choosing the authentic OEM Goodman sensor guarantees the correct rod length, alloy, and flame-rectification signal your ignition control board requires. Generic sensors can produce a weak or unstable microamp signal, leading to nuisance lockouts even when the flame is present. The OEM part ensures a strong, consistent reading for trouble-free operation.

Installation Difficulty: Easy

This is one of the simplest furnace repairs — typically 10 minutes. Turn off power and gas, remove the burner cover, disconnect the single sensor wire, remove one screw, and install the new sensor. Avoid touching the metal rod with bare hands, as oils can shorten its life. Restore power and verify a stable flame-sense reading if you have a multimeter (a healthy signal is generally above 1.0 microamps). No special tools are required, making this an ideal DIY repair.

Keep your AMH80704BNAB furnace burning cleanly and reliably with this genuine OEM flame sensor.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80704BNAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80704BNAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80704BNAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu