What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMH80403ANBD — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMH80403ANBD — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMH80403ANBD — 0130F00010S

Name: OEM Goodman Flame Sensor for AMH80403ANBD — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4948
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4948 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor built as a direct replacement for the Amana/Goodman AMH80403ANBD gas furnace. The flame sensor uses flame rectification to confirm the burner has actually lit; if it can't detect flame, the control board closes the gas valve as a safety measure. A dirty, cracked, or worn flame rod is the single most common cause of a furnace that lights briefly then shuts off (short-cycles on flame failure).

Specifications

Part number: 0130F00010S
Function: Flame rectification sensor (flame rod)
Fits: Amana/Goodman AMH80403ANBD gas furnace
Element: Kanthal-type sensing rod with ceramic insulator
Mounting: OEM single-screw bracket fit
Genuine OEM Goodman / Amana component

OEM vs. Generic

OEM 0130F00010S provides the correct rod length, position, and micro-amp signal characteristics the control board expects. Generic sensors may produce a weak or unstable flame-current reading, leading to intermittent lockouts. For reliable ignition, the OEM sensor is recommended.

Installation Difficulty

Easy — Turn off power and gas, remove the single mounting screw, unplug the sensor wire, and install the replacement. A quick 10–15 minute repair; avoid touching the rod with bare fingers. Suitable for a confident DIYer.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AMH...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMH80403ANBD — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMH80403ANBD — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMH80403ANBD — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu