What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMES961005CNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMES961005CNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMES961005CNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMES961005CNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod built for the AMES961005CNAA gas furnace and compatible Goodman/Amana models. The sensor confirms the burner has actually lit by passing a small microamp current through the flame; when the rod becomes oxidized, cracked, or coated with silica, the control board can no longer detect flame and shuts the furnace down after a few seconds — the classic ignites-then-drops-out or short-cycling no-heat symptom. Replacing this inexpensive part restores reliable ignition.

Specifications

Part type: Single-rod flame sensor (rectification)
Signal: Microamp DC flame current to control board
Fits: Goodman / Amana AMES961005CNAA and many 90%+ furnaces
Mounting: Single-screw burner-assembly mount
Ceramic insulator with spade terminal
Brand: Goodman (Daikin) OEM

OEM vs. Generic

The OEM 0130F00010S uses the exact rod length and ceramic isolator specified for this burner, guaranteeing proper flame immersion and a strong signal. Our Generic equivalent delivers the same fit and function at a lower cost for out-of-warranty repairs. Both drop in without modification.

Installation

Difficulty: Easy (1/5). Cut power, remove the single mounting screw, unplug the wire, and swap in the new sensor. Do not sand a new sensor. Takes 5–10 minutes. Tip: keep a spare on hand, as flame sensors are a routine maintenance wear item.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMES961005CNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMES961005CNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMES961005CNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu