What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMES920803BNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMES920803BNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMES920803BNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMES920803BNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4721
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4721 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is the OEM flame sensor (flame rod) for the Amana AMES920803BNAA gas furnace. It uses flame rectification to prove the burner has actually lit; the control board reads the microamp signal from the rod and keeps the gas valve open only while a flame is confirmed. A dirty, corroded, or cracked flame sensor is the single most common cause of a furnace that lights then shuts off after a few seconds and repeatedly short-cycles on ignition lockout.

Specifications

Type: Flame-rectification sensing rod
Signal: Provides microamp flame-proving current to the ignition control
Fit: Amana AMES920803BNAA and compatible Goodman/Amana furnaces
OEM Part Number: 0130F00010S
Brand: Goodman / Amana (Daikin)

OEM vs. Generic

The genuine OEM 0130F00010S uses the correct rod length, alloy, and ceramic insulator so the flame-sense current stays in the board's expected range. Universal flame sensors sometimes read low or bend to the wrong position in the flame, causing intermittent lockouts. Choose OEM for a guaranteed match; a value generic equivalent is available for budget repairs.

Install Difficulty

Very easy — DIY-friendly (10–15 min). Power down the furnace, remove the single mounting screw, unplug the spade connector, and swap in the new rod — do not touch the metal rod with bare fingers. While you're in there, it's good practice to keep the burner area clean. Restore power and confirm a steady flame with no lockout.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMES920803BNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMES920803BNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMES920803BNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu