What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMES801005CXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMES801005CXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMES801005CXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMES801005CXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4682
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4682 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The 0130F00010S is the OEM flame sensor for the Amana/Goodman AMES801005CXAA gas furnace. On a hot-surface-ignition system, the flame sensor proves that the burners actually lit. It generates a tiny microamp rectified current through the flame; if the control board doesn't read that signal within the trial-for-ignition window, it closes the gas valve and locks out. A dirty, cracked, or worn flame rod is the single most common cause of furnace short-cycling and intermittent no-heat calls.

Specifications

Function: Flame rectification / flame-proving sensor
Fits: Amana / Goodman AMES801005CXAA and compatible platforms
Signal: Microamp flame-current sensing rod
OEM Part Number: 0130F00010S
Brand: Goodman / Amana factory OEM

OEM vs. Generic

The OEM 0130F00010S uses the correct rod length, bracket geometry, and alloy so it sits precisely in the burner flame and delivers a strong, stable signal to the board. Generic sensors may mount but sit out of the flame envelope, producing weak microamps and repeat lockouts. OEM is recommended for reliable long-term flame detection.

Installation

Difficulty: Easy (15–20 minutes). A single mounting screw and one push-on wire. Kill power and gas first. If the old rod was only fouled, replacing it with this new OEM sensor restores full flame current — verify a reading above roughly 1.5 µA after install.

Fits the AMES801005CXAA furnace. For fitment help, email info@nationalhvacparts.com.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMES801005CXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMES801005CXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMES801005CXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu