What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMES800804BXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMES800804BXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMES800804BXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMES800804BXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4651
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4651 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The 0130F00010S is a genuine OEM Goodman/Amana flame sensor built for the AMES800804BXAA gas furnace and compatible Goodman-family models. The flame sensor uses flame rectification to confirm the burner has lit; if it cannot detect flame, the control board shuts the gas valve for safety. A dirty, cracked, or worn sensor is one of the most common causes of a furnace that lights briefly then shuts off (short cycling) or fails to stay running on cold mornings.

Specifications

Part number: 0130F00010S
Category: Flame sensor / flame rectification rod
Fits: AMES800804BXAA and compatible Goodman/Amana furnaces
Function: Flame proving for burner ignition sequence
Equipment type: Gas furnace

OEM vs. Generic

Genuine OEM sensors use the correct rod length, ceramic insulator, and terminal geometry so the microamp signal reads within spec on the factory control board. Universal sensors may seat at the wrong depth in the flame envelope and produce weak or erratic readings, triggering nuisance lockouts. OEM is the reliable choice.

Installation Difficulty

Easy. Typically a single screw and one push-on wire connector. Cut power to the furnace, swap the sensor, and restore power. Gently cleaning the old rod with fine steel wool is a good first troubleshooting step before replacing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMES800804BXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMES800804BXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMES800804BXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu