What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMES800604BXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMES800604BXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMES800604BXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMES800604BXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4629
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4629 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Genuine Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a factory-original flame sensor for the Amana/Goodman AMES800604BXAA gas furnace. This flame-rectification rod sits in the burner flame and confirms to the control board that a flame is actually present after ignition. If the sensor reads no flame, the board closes the gas valve within seconds as a safety measure. A dirty, corroded, or failed flame sensor is the single most common cause of furnace short cycling — where the burners light briefly and then shut off — making this an inexpensive fix for a very frequent complaint.

Specifications

Type: Flame rectification sensor rod
Single-terminal sensing element with mounting bracket
Detects micro-amp flame signal for the control board
Direct OEM replacement for part 0130F00010S
Fits AMES800604BXAA and related Goodman/Amana furnaces

OEM vs. Generic

Flame sensors must produce a clean, reliable micro-amp signal within the control board's detection window. The genuine OEM 0130F00010S uses the correct rod material and geometry to deliver a stable flame signal. Generic sensors can read low or drift over time, reintroducing the short-cycling problem you're trying to solve. For a component this affordable, OEM is the smart choice.

Installation Difficulty

Easy (1 of 5). Typically a single-screw, single-wire replacement completed in 10 to 15 minutes. Cut power first, and avoid touching the ceramic insulator or rod with bare fingers. If the old sensor was merely dirty, gently cleaning it with fine abrasive is a common first step, but replacement is the permanent fix.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMES800604BXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMES800604BXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMES800604BXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu