What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEH961005DXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEH961005DXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEH961005DXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEH961005DXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-0130F00010S
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-0130F00010S Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement rod for the Amana/Goodman AMEH961005DXAA 96% AFUE multi-speed gas furnace. The flame sensor confirms the burner has lit during each heating cycle; when the rod oxidizes or cracks, the control board loses its flame signal and shuts the furnace down — producing intermittent no-heat calls, short-cycling, and repeated ignition lockouts. Replacing this low-cost part is the single most common fix for a furnace that lights briefly then shuts off.

Genuine OEM Goodman/Amana part number 0130F00010S
Direct fit for AMEH961005DXAA and compatible AMEH96 series furnaces
Kanthal/nickel flame rectification rod with integrated ceramic insulator
Includes spade terminal connection and single mounting screw location
Resolves flame-sense lockout codes and short-cycle faults

OEM vs. Generic

Our OEM version is the exact factory rod, guaranteeing correct rod length, insulator standoff, and micro-amp signal strength your control board expects. The generic version is a quality-matched aftermarket sensor built to the same fitment and electrical spec at a lower price — an excellent value for out-of-warranty repairs. Both are new, not refurbished.

Installation Difficulty: Easy

Rated Easy (DIY-friendly, ~15 minutes). Shut off power at the furnace switch, remove the single mounting screw, unplug the spade connector, and install the new sensor. Tip: never sand a new sensor — install it clean and dry. Always confirm gas and power are off before servicing. If replacement does not restore a steady flame signal, inspect the control board and burner ground.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEH961005DXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEH961005DXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEH961005DXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu