What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEH960805CXAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEH960805CXAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEH960805CXAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEH960805CXAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4577
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4577 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The genuine OEM Goodman 0130F00010S flame sensor is a precision flame-rectification rod for the Amana/Goodman AMEH960805CXAA gas furnace. The flame sensor confirms burner ignition by sensing the microamp current that flows through an active flame; if the control board doesn't detect that signal, it shuts off the gas valve as a safety measure. A dirty, oxidized, or failed flame rod is the single most common cause of furnace short cycling and intermittent no-heat calls, making this an essential, low-cost repair part.

Specifications

OEM Part Number: 0130F00010S
Component: Flame sensor / flame-rectification rod
Compatible Model: AMEH960805CXAA
Brand: Goodman / Amana
Function: Confirms burner flame via microamp signal
Construction: High-temperature alloy rod with ceramic insulator

OEM vs. Generic

The OEM Goodman 0130F00010S uses the correct rod length, bracket, and ceramic insulator so the tip sits in the proper flame envelope for a stable signal. Generic sensors may position the rod incorrectly, producing weak flame current, false lockouts, and repeat callbacks. For a safety-critical sensing component, OEM is the reliable choice.

Installation Difficulty

Easy (2/5). Typically one screw and a single spade connector. Cut power, remove the burner-area screw, unplug the wire, install the new sensor, and restore power. A quick, high-impact repair for most homeowners and technicians.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEH960805CXAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEH960805CXAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEH960805CXAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu