What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEH800805DNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEH800805DNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEH800805DNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEH800805DNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4468
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-4468 Brand: Goodman

$34.95 $46.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor for the AMEH800805DNAA gas furnace and compatible Goodman/Amana models. The flame sensor uses flame rectification to confirm the burner has actually lit; if it cannot detect flame, the control board shuts off the gas valve as a safety measure. A dirty or failing flame sensor is one of the most common causes of furnace short-cycling — the burner lights, runs a few seconds, then shuts down repeatedly.

Specifications

Type: Flame rectification sensor rod
OEM Part Number: 0130F00010S
Fits: AMEH800805DNAA and compatible Goodman/Amana furnaces
High-temperature sensing element
Ceramic insulator with factory-spec mounting bracket
Direct plug-and-mount replacement

OEM vs. Generic

Flame sensors depend on a stable micro-amp signal to the control board. Cheap generic rods can produce a weak or noisy signal, leading to intermittent lockouts even when the flame is present. This OEM Goodman flame sensor delivers the exact rod length, position, and material for a reliable flame signal on AMEH-series furnaces.

Installation Difficulty

Easy. Usually one screw and a single wire connector. Cut power first, unplug the wire, remove the screw, and install the new sensor without touching the rod with bare fingers. Estimated time: 10–15 minutes.

Shut off electrical power before servicing. If unsure, consult a licensed HVAC professional.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEH800805DNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEH800805DNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEH800805DNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu