What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC961205DNAC Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC961205DNAC Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC961205DNAC Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC961205DNAC Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4366
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4366 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor (flame rod) built for the AMEC961205DNAC gas furnace. The flame sensor confirms that a flame is present after ignition by generating a small microamp rectification signal to the control board. When the rod becomes oxidized, cracked, or coated in silica, the signal drops and the furnace shuts down the burners as a safety measure — the classic cause of short cycling and intermittent no-heat faults.

Specifications

Part Number: 0130F00010S
Type: Flame Sensing Rod
Function: Flame rectification / proving
Compatible Model: AMEC961205DNAC
Connection: Single spade terminal
Brand: Goodman / Amana OEM

OEM vs. Generic

Genuine OEM sensors use the correct rod length, alloy, and ceramic insulator to sit precisely in the burner flame for a stable signal. Generic sensors often mis-position in the flame, producing weak or unstable microamp readings that lead to nuisance lockouts. For a reliable long-term fix, OEM is the better value.

Installation Difficulty

Easy. Typically a single mounting screw and one wire connector — a 10–15 minute job. Shut off power and gas first, remove the old sensor, install the new rod, and gently clean adjacent surfaces. A great DIY repair for restoring reliable ignition.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC961205DNAC Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC961205DNAC Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC961205DNAC Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu