What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC961005CNAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC961005CNAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC961005CNAB — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC961005CNAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4317
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4317 Brand: Goodman

$26.95 $34.99

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

The Goodman 0130F00010S is a genuine OEM flame sensor built for the AMEC961005CNAB gas furnace. The flame sensor is a metal rod that sits in the burner flame and confirms ignition through flame rectification, sending a small microamp signal back to the control board. When the sensor becomes coated with oxide or fails, the furnace lights and then shuts down within seconds — the classic short-cycling / no-heat complaint. Replacing it with the exact OEM rod restores reliable flame proving.

Specifications

OEM Part Number: 0130F00010S
Type: Flame-rectification sensing rod
Fits: Goodman / Amana AMEC961005CNAB gas furnace
Function: Confirms burner ignition to the control board
Includes: Sensor rod with mounting terminal

OEM vs. Generic

The genuine Goodman sensor uses the correct rod length, alloy, and terminal position so the microamp signal falls within the control board's expected range. Generic sensors can read low, causing intermittent lockouts. OEM guarantees a clean, in-spec flame signal and proper alignment in the burner flame.

Installation Difficulty

Easy — DIY friendly. Shut off power, remove one screw and the wire terminal, and swap the sensor. Avoid touching the rod with bare fingers. If your old sensor was simply dirty, note that a new OEM unit prevents the problem from recurring sooner than a light cleaning would.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC961005CNAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC961005CNAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC961005CNAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu