What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC961004CNAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC961004CNAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC961004CNAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC961004CNAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4273
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4273 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S flame sensor is a genuine OEM flame-rectification rod for the AMEC961004CNAA gas furnace. After ignition, the control board sends a small current through this rod; the flame conducts that current to ground, confirming a burner is lit. A dirty, corroded, or failed sensor is one of the most common causes of a furnace that lights and then shuts off after a few seconds (short-cycling) or fails to stay running.

Specifications

Type: Single-rod flame rectification sensor
Function: Proves burner flame to the ignition control
Construction: Metal rod with ceramic insulator and spade terminal
Symptom fix: No-heat, ignition lockout, post-ignition short-cycling
Fit: OEM Goodman / Amana AMEC961004CNAA
OEM Part Number: 0130F00010S

OEM vs. Generic

The genuine OEM 0130F00010S has the correct rod length, bend, and insulator so it sits precisely in the flame envelope and reads a strong microamp signal. Generic sensors that sit too shallow or deep produce weak, unstable readings that trip the board's flame-sense threshold. Given how cheap this part is relative to a service call, fitting OEM avoids repeat failures.

Installation Difficulty

Easy (1.5/5). Power off at the breaker, remove the burner panel, unplug the single wire, remove one screw, and install the new sensor. Do not touch the rod with bare fingers — oils cause premature fouling. A quick, high-value DIY repair for most homeowners.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC961004CNAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC961004CNAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC961004CNAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu