What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC960603ANAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC960603ANAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC960603ANAB — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC960603ANAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4134
Price: 39.95 USD
Availability: InStock

SKU: GOODMAN-4134 Brand: Goodman

$39.95 $52.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the AMEC960603ANAB gas furnace. This sensor confirms to the control board that a flame is present after ignition; when it degrades or becomes coated with oxide buildup, the furnace lights briefly then shuts down — the classic short-cycling / flame-loss lockout that leaves you with no heat.

Specifications

Part type: Flame sensor / flame-rectification rod
OEM Part Number: 0130F00010S
Function: Detects flame via micro-amp rectification signal
Mounting: Single-screw bracket at burner assembly
Fits: AMEC960603ANAB and related Goodman/Amana furnaces
Brand: Goodman (Daikin family)

OEM vs. Generic

This genuine OEM sensor uses the correct rod alloy, length, and bracket bend to sit precisely in the flame path and produce a strong, stable signal. Generic sensors often mis-position in the flame or generate a weak microamp reading, causing intermittent lockouts. For reliable flame proving, OEM is worth it.

Installation Difficulty

Rating: Easy (2/5). Shut off gas and power. Remove the burner-compartment panel, unplug the single sensor wire, remove the mounting screw, and install the new sensor. Avoid touching the rod with bare fingers (oils reduce conductivity). Reconnect and restore power. Typical time: 10–15 minutes — one of the most satisfying no-heat fixes a homeowner can do.

Restore dependable ignition and eliminate flame-loss lockouts with the exact OEM flame sensor.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$39.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC960603ANAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC960603ANAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC960603ANAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu