What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC960603ANAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC960603ANAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC960603ANAA — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC960603ANAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4124
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4124 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-proving rod that confirms the burner has lit. It generates a small microamp rectified current through the flame; if the control board doesn't see that signal, it shuts off the gas valve as a safety measure. A dirty or failing flame sensor is one of the most common causes of a furnace that lights briefly and then shuts down (short-cycling on ignition lockout). This is the factory-correct part for the Amana/Goodman AMEC960603ANAA gas furnace.

Specifications

Part number: 0130F00010S
Type: Flame sensor / flame-proving rod
Function: Rectifies flame current to prove ignition
Mount: Single-screw bracket with spade terminal
Fits: AMEC960603ANAA and compatible Goodman/Amana furnaces
Brand: Goodman (Amana platform)

OEM vs. Generic

Genuine OEM uses the correct rod length, alloy, and bracket angle so the tip sits properly in the flame for a stable microamp signal. Generic rods are often mispositioned, leading to weak flame signal and repeat lockouts. For a reliable ignition sequence, OEM is worth it.

Installation Difficulty

Easy (2/5). Shut off power and gas, remove one screw, unplug the wire, and swap. Tip: gently clean the rod with fine steel wool or emery cloth during service — never sandpaper the ceramic insulator.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC960603ANAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC960603ANAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC960603ANAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu