What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC960403ANAB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC960403ANAB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC960403ANAB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC960403ANAB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4114
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4114 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the Amana/Goodman AMEC960403ANAB gas furnace. The sensor confirms the burner has actually lit by detecting the microamp current that flows through an active flame. When the sensor becomes coated with oxide or fails, the control board can't verify flame and shuts the gas valve — producing the classic symptom of a furnace that lights briefly then shuts off (short cycling) or locks out with no heat.

Specifications

OEM Part Number: 0130F00010S
Type: Flame sensor / flame-rectification rod
Function: Verifies burner flame via microamp signal
Brand: Goodman / Amana
Fits: AMEC960403ANAB furnace

OEM vs. Generic

OEM sensors use the correct rod length, alloy, and mounting bracket so the flame fully envelops the tip for a strong, stable signal. Generic sensors sometimes read a weak microamp value that causes intermittent lockouts. Given how central this part is to reliable ignition, genuine OEM is the dependable choice.

Install Difficulty

Beginner (2/5). Shut off power, remove one mounting screw and the single wire connector, and swap in the new sensor. Avoid touching the metal rod with bare hands — oils reduce the signal. A one-screw job that resolves most no-heat and short-cycling calls.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC960403ANAB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC960403ANAB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC960403ANAB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu