What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC960303ANAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC960303ANAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC960303ANAB — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC960303ANAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4061
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4061 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod built for the AMEC960303ANAB gas furnace and compatible Goodman/Amana models. It confirms the burner flame is present during ignition; if the control board doesn't receive a micro-amp flame-rectification signal within the trial period, it shuts off gas to prevent unburned fuel from accumulating.

A weak or contaminated flame sensor is the number-one cause of furnace short-cycling — the burner lights, runs for a few seconds, then shuts off and repeats, often ending in ignition lockout. Carbon and oxide buildup on the rod reduces the signal over time. Replacing with the exact OEM sensor restores a clean, reliable flame signal.

Specifications

OEM Part Number: 0130F00010S
Type: Single-rod flame sensor (flame rectification)
Signal: Micro-amp DC flame current
Fits: AMEC960303ANAB and compatible Goodman/Amana furnaces
Function: Burner flame proving / safety shutoff

OEM vs. Generic

The genuine OEM 0130F00010S matches the exact rod length, bend geometry, and mounting bracket your furnace requires for correct flame immersion and signal strength. Generic sensors may fit the terminal but sit at the wrong depth in the flame, producing a low or erratic signal that mimics the very failure you're trying to fix. OEM ensures dependable, code-correct operation.

Installation Difficulty

Easy (1/5). Cut furnace power, remove the single mounting screw, disconnect the sensor wire, and install the replacement. Takes about 10 minutes. Avoid touching the rod with bare fingers. If a new sensor doesn't cure short-cycling, inspect the ground and burner alignment.

100% genuine Goodman/Amana OEM. Fit questions? Email info@nationalhvacparts.com.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC960303ANAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC960303ANAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC960303ANAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu