What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC960302BNAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC960302BNAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC960302BNAB — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC960302BNAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-4030
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-4030 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM component engineered for the Amana/Goodman AMEC960302BNAB 96% AFUE gas furnace. This flame-rectification rod confirms the presence of a stable burner flame after ignition. If your furnace lights briefly and then shuts down (short-cycling or lockout), a dirty or failed flame sensor is the most common culprit — replacing it restores dependable heating.

Specifications

OEM Part Number: 0130F00010S
Fits Model: AMEC960302BNAB
Type: Single-rod flame sensor (flame rectification)
Compatibility: Goodman & Amana 90%+ condensing gas furnaces
Material: High-temperature stainless steel probe with ceramic insulator
Connection: Standard 1/4" spade terminal

OEM vs. Generic

Our OEM Goodman flame sensor delivers the exact rod length, probe alloy, and insulator rating specified by the factory, ensuring correct microamp flame signal and long service life. Lower-cost generics often use thinner probes that oxidize quickly, leading to repeat nuisance lockouts. For a critical safety component, OEM is the smart choice.

Installation Difficulty

Easy (1 of 5) — A single mounting screw and one wire connector. Turn off power at the furnace disconnect, remove the old sensor, install the new one, and reconnect. Most homeowners complete this in under 15 minutes. Always shut off gas and power before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC960302BNAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC960302BNAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC960302BNAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu