What are the specs for this Flame Sensor?

The correct replacement for Goodman model AMEC800804CXAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMEC800804CXAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for AMEC800804CXAB — 0130F00010S

Name: OEM Goodman Flame Sensor for AMEC800804CXAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3930
Price: 29.95 USD
Availability: InStock

SKU: GOODMAN-3930 Brand: Goodman

$29.95 $39.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM replacement part engineered for the Amana/Goodman AMEC800804CXAB gas furnace and compatible 80% AFUE models. The flame sensor (flame rod) confirms that a flame is present after ignition; when it degrades or becomes coated with oxide buildup, the control board fails to prove flame and the burners shut down within seconds — the most common cause of short-cycling and no-heat calls.

Specifications

OEM Part Number: 0130F00010S
Brand: Goodman / Amana
Component: Flame sensor / flame rectification rod
Equipment: Gas furnace (80% AFUE class)
Fits Model: AMEC800804CXAB
Mounting: Single-screw burner-bracket mount with spade terminal

OEM vs. Generic

Our OEM Goodman flame sensor uses the correct kanthal rod length and terminal geometry, so flame-rectification current stays in spec and the board reliably proves flame. Lower-cost generic rods often sit at the wrong depth in the flame envelope, producing weak microamp signals and nuisance lockouts. For a safety-critical sensing component we recommend the genuine part.

Installation Difficulty: Easy (1/5)

Replacement is straightforward for a handy homeowner or technician: power down the furnace, remove the single mounting screw, unplug the spade connector, and install the new sensor. No tools beyond a nut driver are typically required. Always verify a flame-sense microamp reading after install where possible.

Note: this is a safety-related component. If you are not comfortable working on a gas appliance, contact a licensed HVAC technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for AME...

$29.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman AMEC800804CXAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman AMEC800804CXAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman AMEC800804CXAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu