What are the specs for this Flame Sensor?

The correct replacement for Goodman model ADVC80805CNBB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ADVC80805CNBB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ADVC80805CNBB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ADVC80805CNBB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3593
Price: 44.95 USD
Availability: InStock

SKU: GOODMAN-3593 Brand: Goodman

$44.95 $58.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S flame sensor is a genuine OEM ignition component for the Goodman/Amana ADVC80805CNBB gas furnace. The flame sensor (flame rod) confirms to the control board that the burners have actually lit, using flame rectification to produce a small microamp current. If the board doesn't detect that signal within a few seconds, it closes the gas valve for safety. A dirty, corroded, or cracked flame sensor is one of the most common causes of furnace short cycling and repeated ignition lockouts.

Specifications

Type: Flame sensor / flame rectification rod
Function: Burner flame proving for the ignition control
OEM Part Number: 0130F00010S
Brand: Goodman / Amana
Fits: ADVC80805CNBB and compatible furnace models

OEM vs. Generic

The OEM Goodman 0130F00010S uses the correct rod length, mounting bracket, and terminal so the control board reads a reliable flame-rectification signal. Generic sensors may sit at the wrong position in the flame, producing weak or intermittent microamp readings that trigger nuisance lockouts. For dependable ignition, OEM is the better value.

Installation Difficulty

Easy — usually a single mounting screw and one spade connector after powering down the furnace. Handle the rod by its ceramic base only. A DIY-capable homeowner can often replace it, though professional service is recommended if lockouts persist.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ADV...

$44.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ADVC80805CNBB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ADVC80805CNBB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ADVC80805CNBB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu