What are the specs for this Flame Sensor?

The correct replacement for Goodman model ADVC80603BXBB Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ADVC80603BXBB Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ADVC80603BXBB Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ADVC80603BXBB Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3555
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-3555 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00010S Flame Sensor

This genuine OEM Goodman 0130F00010S flame sensor is a direct-fit replacement for the Goodman/Amana ADVC80603BXBB gas furnace and many compatible 80% AFUE models. The flame sensor (flame rectification rod) confirms that a flame is present after ignition. When the rod becomes oxidized or cracked, the control board loses the flame signal and shuts the burners down — causing short cycling, no heat, or a furnace that lights briefly then drops out. Replacing a worn sensor restores reliable, safe furnace operation.

Specifications

OEM Part Number: 0130F00010S
Fits: Goodman ADVC80603BXBB and compatible furnaces
Function: Flame rectification / flame proving
Type: Single-rod flame sensor with mounting bracket
Material: Kanthal rod with ceramic insulator

OEM vs. Generic

The OEM Goodman sensor guarantees exact rod length, bracket alignment, and terminal fit for a proper micro-amp flame signal. Generic universal sensors may require bending or re-terminating and can produce a weak signal that trips lockout. For a furnace that must run all winter, the factory part is the safer choice.

Install Difficulty

Easy (1/5). Cut power at the furnace, remove one mounting screw, unplug the spade connector, swap in the new sensor, and reconnect. Most homeowners complete this in under 15 minutes. Cleaning the old rod is a temporary fix — replacement is the permanent solution.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ADV...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ADVC80603BXBB Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ADVC80603BXBB Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ADVC80603BXBB Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu