What are the specs for this Flame Sensor?

The correct replacement for Goodman model ADVC80603BNBA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ADVC80603BNBA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ADVC80603BNBA — 0130F00010S

Name: OEM Goodman Flame Sensor for ADVC80603BNBA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3514
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-3514 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod for the ADVC80603BNBA gas furnace. The sensor confirms a flame is present after ignition by conducting a tiny microamp current through the flame; if it reads no flame, the control board closes the gas valve for safety. A dirty, corroded, or cracked sensor is one of the most common causes of furnace short-cycling and ignition lockouts, where the burners light briefly then shut off. Installing a fresh OEM sensor restores a reliable flame signal.

Specifications

Part Number: 0130F00010S
Type: Flame sensor / flame-rectification rod
Brand: Goodman (also fits Amana-branded equivalents)
Equipment: Gas Furnace
Compatible Model: ADVC80603BNBA
Signal: Microamp flame-current sensing

OEM vs. Generic

The genuine OEM Goodman sensor uses the correct rod length, alloy, and mounting bracket so it sits precisely in the flame envelope for a strong, stable microamp signal. Generic sensors may mount at the wrong depth or angle, producing weak or erratic readings and continued lockouts. For a sensing component, exact positioning is everything.

Install Difficulty

Easy (2/5). Power down the furnace, remove the single mounting screw, unplug the sensor wire, and install the new rod in the same position. About 10 minutes. Avoid touching the rod with bare fingers — oils can foul the surface. If issues persist, verify the burner ground and control board.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ADV...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ADVC80603BNBA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ADVC80603BNBA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ADVC80603BNBA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu