What are the specs for this Flame Sensor?

The correct replacement for Goodman model ADVC80603BNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ADVC80603BNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ADVC80603BNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for ADVC80603BNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3504
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-3504 Brand: Goodman

$34.95 $46.99

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification probe for the ADVC80603BNAA gas furnace. The sensor uses a small flame-rectification current to confirm that the burner has actually lit. When the rod becomes coated with oxide or carbon, the control board no longer 'sees' the flame and shuts off the gas as a safety measure — the classic cause of a furnace that lights briefly then short-cycles. Replacing a failed sensor restores reliable, safe ignition.

Part number: 0130F00010S
Type: Flame rectification sensor (flame rod)
Function: Burner flame proving
Fits: Goodman ADVC80603BNAA furnace
Symptom fixed: Short-cycling, ignition lockout
Mounting: Single-screw bracket with spade terminal

OEM vs. Generic

This genuine Goodman OEM sensor delivers a clean, stable microamp signal matched to the furnace's control board. Generic rods sometimes produce a weak or noisy signal that the board rejects, causing repeat lockouts. For a reliable flame-proving circuit, OEM is the recommended fit.

Installation Difficulty

Easy — Cut power, remove one mounting screw, unplug the wire, and install the new sensor. A common DIY-friendly repair. Avoid touching the rod with bare fingers, and route the wire clear of hot surfaces.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ADV...

$34.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ADVC80603BNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ADVC80603BNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ADVC80603BNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu