What are the specs for this Flame Sensor?

The correct replacement for Goodman model ADSS800603AXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ADSS800603AXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ADSS800603AXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ADSS800603AXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3288
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-3288 Brand: Goodman

$26.95 $34.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S Flame Sensor is the flame-rectification rod that confirms the burner has lit on the Goodman ADSS800603AXAA furnace. The control board reads the micro-amp signal from this sensor; if the flame isn't detected within a few seconds, the board shuts the gas valve for safety. A dirty, cracked, or worn flame sensor is the single most common cause of furnace short-cycling and intermittent no-heat calls.

Specifications

Type: Single-rod flame sensor (flame rectification)
Function: Proves burner flame to the ignition control
Signal: Micro-amp flame current to control board
OEM Part Number: 0130F00010S
Brand: Goodman / Amana
Equipment: Gas furnace (ADSS800603AXAA and compatible)

OEM vs. Generic

This OEM Goodman sensor uses the correct rod length, bracket, and terminal for a true drop-in fit and a stable flame signal. Generic sensors can sit at the wrong depth in the flame, producing a weak micro-amp reading and continued lockouts. For reliable flame proving, choose OEM.

Installation Difficulty

Easy (1 of 5). Remove one screw, unplug the wire, and swap. Turn off power and gas first; avoid touching the rod with bare fingers. If the fault persists, verify flame current with a meter (typically 1–6 µA).

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ADS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ADSS800603AXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ADSS800603AXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ADSS800603AXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu