What are the specs for this Flame Sensor?

The correct replacement for Goodman model ADSH801005CXAB — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ADSH801005CXAB — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ADSH801005CXAB — 0130F00010S

Name: OEM Goodman Flame Sensor for ADSH801005CXAB — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3243
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-3243 Brand: Goodman

$26.95 $35.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM ignition component for the ADSH801005CXAB gas furnace and compatible Goodman/Amana models. This flame-rectification rod sits in the burner flame and confirms to the control board that ignition has occurred. When the sensor becomes coated or fails, the board reads no flame and shuts off the gas valve — the classic cause of a furnace that lights briefly then short-cycles or locks out.

Specifications

Function: Flame-rectification sensing rod
Signal: Microamp flame-current detection
Mounting: Single-screw burner-bracket mount
Fits: ADSH801005CXAB and compatible Goodman/Amana furnaces
Type: Direct OEM replacement (S = service kit)

OEM vs. Generic

This genuine OEM Goodman part (0130F00010S) uses the correct rod length, alloy, and insulator rating to produce a reliable microamp signal your control board expects. Generic sensors often mis-position in the flame or degrade quickly, causing repeat lockouts. OEM ensures a stable, in-spec flame signal.

Installation Difficulty

Easy — Usually one mounting screw and a single quick-connect wire. Shut off power, swap the sensor, and avoid touching the rod with bare fingers (oils cause fouling). A common 10-minute repair for most DIYers.

Disconnect power before servicing. If lockouts persist after replacement, have the gas valve and control board inspected.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ADS...

$26.95

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ADSH801005CXAB — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ADSH801005CXAB — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ADSH801005CXAB — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu