What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVM971005CNBA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVM971005CNBA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACVM971005CNBA — 0130F00010S

Name: OEM Goodman Flame Sensor for ACVM971005CNBA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3069
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-3069 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S Flame Sensor confirms the presence of a burner flame on the ACVM971005CNBA gas furnace. Using flame rectification, the sensor sends a micro-amp signal to the control board to verify ignition; if no flame is detected, the board shuts off the gas valve for safety. A dirty or failed flame rod is one of the most common causes of furnaces that light briefly then shut down (short-cycling on flame loss).

Specifications

Part Number: 0130F00010S
Type: Flame sensor / flame rectification rod
Function: Burner flame verification
Equipment: Goodman gas furnace
Fits Model: ACVM971005CNBA
Brand: Goodman (OEM)

OEM vs. Generic

This OEM Goodman sensor uses the correct rod length, bracket angle, and terminal to seat properly in the burner flame and read a stable signal. Generic sensors may sit too high or low in the flame, producing weak or erratic micro-amp readings and intermittent lockouts. OEM ensures consistent ignition.

Installation Difficulty

Easy (1/5). Shut off power, remove the single mounting screw, unplug the wire, and install the new sensor—avoid touching the rod with bare fingers. Many no-heat issues are solved simply by replacing or gently cleaning this part. If lockouts persist after replacement, have a technician check the ground and control board.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACV...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVM971005CNBA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVM971005CNBA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVM971005CNBA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu