What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVM970603BNBA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVM970603BNBA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACVM970603BNBA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACVM970603BNBA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-3006
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-3006 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S Flame Sensor is the factory flame-rectification rod used by the ACVM970603BNBA modulating furnace and compatible Goodman/Amana models. It confirms the presence of a burner flame by passing a micro-amp rectified current to the control board. If the board does not sense flame within the trial-for-ignition window, it shuts the gas valve and the furnace locks out — making the flame sensor one of the most common no-heat service items.

A dirty, corroded, or cracked sensor causes intermittent ignition, short cycling, and lockouts. While a coated rod can sometimes be cleaned, a weak or damaged sensor should be replaced with the correct OEM part.

Specifications

Part type: Flame sensor / flame-rectification rod
Function: Micro-amp flame proving signal to control board
Brand: Goodman / Amana OEM
OEM part number: 0130F00010S
Fits: ACVM970603BNBA and compatible furnaces

OEM vs. Generic

The OEM Goodman sensor uses the correct rod length, ceramic insulator rating, and mounting bracket so it sits precisely in the burner flame for a stable signal. Generic rods may sit too high or low in the flame, producing a marginal micro-amp reading and recurring nuisance lockouts. OEM ensures a clean, repeatable flame-proving signal.

Installation Difficulty

Easy (1/5). Single mounting screw and one push-on wire lead — usually a 10-minute job. Shut off power and gas before servicing. Handle the ceramic insulator carefully and avoid touching the rod with bare fingers.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACV...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVM970603BNBA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVM970603BNBA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVM970603BNBA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu