What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVM960805DXAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVM960805DXAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACVM960805DXAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACVM960805DXAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2965
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2965 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S flame sensor is the OEM-direct replacement for ACVM960805DXAA 96% AFUE gas furnaces and matching Goodman/Amana platforms. The flame sensor (flame rod) sits in the burner flame and uses flame rectification to confirm a proper light. When it weakens or oxidizes, the control board can't prove flame, causing short cycling, lockouts, or a furnace that ignites then shuts down after a few seconds.

Part number: 0130F00010S (OEM Goodman)
Function: Flame proving via rectification current
Compatible model: ACVM960805DXAA and related Goodman/Amana furnaces
Material: High-temp rod with ceramic insulator
Equipment: Gas furnace, single-rod design

OEM vs. Generic

This is the genuine Goodman component, built to the exact rod length, bend, and insulator spec the control board expects, so the microamp signal stays in range. Generic aftermarket sensors may fit physically but often produce a borderline flame signal that triggers nuisance lockouts. For consistent ignition, OEM is the safe choice.

Install difficulty

Easy — typically a single screw and one wire connector. Shut off power and gas, remove the burner cover, swap the sensor, and avoid touching the rod with bare fingers. Most homeowners and techs complete this in 10–15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACV...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVM960805DXAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVM960805DXAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVM960805DXAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu