What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVC961205DNAA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVC961205DNAA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACVC961205DNAA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACVC961205DNAA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2924
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2924 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

This genuine OEM Goodman 0130F00010S Flame Sensor (flame rod) is built for the Goodman/Amana ACVC961205DNAA modulating variable-speed gas furnace and compatible Goodman furnace platforms. The flame sensor confirms the presence of a burner flame through flame rectification, signaling the control board to keep the gas valve open. A dirty or failed sensor is the single most common cause of furnace short-cycling and ignition lockout.

Specifications

OEM Part Number: 0130F00010S
Component Type: Flame sensor / flame rectification rod
Brand: Goodman (Amana / Daikin family)
Equipment: Gas Furnace
Primary Fit: ACVC961205DNAA
Function: Verifies burner flame to maintain the gas valve circuit
Mounting: Single-screw bracket with spade terminal connection

OEM vs. Generic

Generic flame sensors vary in rod length, alloy, and bracket geometry, which can place the rod outside the flame envelope and cause weak or erratic microamp signals. The OEM 0130F00010S uses the correct rod length and corrosion-resistant alloy Goodman specifies, delivering a stable flame-rectification signal and reliable burner operation.

Symptoms of Failure

Furnace lights then shuts off after a few seconds, repeated ignition retries, or full lockout after three failed attempts. Replacing a corroded sensor typically restores normal heating immediately.

Installation Difficulty

Easy (2/5) — Shut off power and gas, remove one mounting screw, disconnect the spade terminal, and install the new sensor. A 10–15 minute repair for a handy homeowner; no special tools beyond a 1/4" nut driver.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACV...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVC961205DNAA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVC961205DNAA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVC961205DNAA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu