What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVC961005CNBA Furnace — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVC961005CNBA Furnace — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACVC961005CNBA Furnace — 0130F00010S

Name: OEM Goodman Flame Sensor for ACVC961005CNBA Furnace — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2915
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2915 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine Goodman 0130F00010S Flame Sensor is a direct OEM replacement for the Goodman ACVC961005CNBA variable-speed 96% AFUE gas furnace. The flame sensor (flame rectification rod) confirms that the burners have ignited so the control board can keep the gas valve open. A dirty, cracked, or worn sensor is the single most common cause of a furnace that lights and then shuts down a few seconds later (short cycling on flame failure).

Specifications

OEM Part Number: 0130F00010S
Type: Single-rod flame rectification sensor
Compatible Model: Goodman ACVC961005CNBA
Equipment: 96% AFUE gas furnace
Brand: Goodman / Amana
Material: Stainless steel rod with ceramic insulator

OEM vs. Generic

This is the factory OEM Goodman part, guaranteed to match the original rod length, bracket geometry, and terminal so it drops straight into the burner assembly. Generic sensors are cheaper but frequently sit at the wrong height in the flame, leading to weak microamp signal and repeat nuisance lockouts. For a part this inexpensive, OEM is the smart long-term choice.

Installation Difficulty

Easy (DIY-friendly) — One screw and one wire spade. Power down the furnace at the disconnect, remove the old sensor, install the new one, and restore power. Most homeowners complete this in under 15 minutes.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACV...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVC961005CNBA Furnace — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVC961005CNBA Furnace — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVC961005CNBA Furnace — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu