What are the specs for this Flame Sensor?

The correct replacement for Goodman model ACVC961005CNAA — 0130F00010S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVC961005CNAA — 0130F00010S.

Is this flame sensor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Flame Sensor for ACVC961005CNAA — 0130F00010S

Name: OEM Goodman Flame Sensor for ACVC961005CNAA — 0130F00010S
Brand: Goodman
SKU: GOODMAN-2906
Price: 32.34 USD
Availability: InStock

SKU: GOODMAN-2906 Brand: Goodman

$32.34 $43.66

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00010S Flame Sensor is a genuine OEM flame-rectification rod built for the Goodman/Amana ACVC961005CNAA condensing gas furnace and compatible 96% AFUE models. The sensor confirms a flame is present after ignition by passing a small microamp current through the flame; if the control board doesn't see that signal, it closes the gas valve as a safety measure.

Over time the rod develops an insulating oxide and silica coating that weakens the flame-sense signal — the classic cause of furnaces that light briefly then shut off (short-cycling) and eventually go into ignition lockout. While cleaning can help temporarily, a degraded sensor should be replaced with the correct OEM part for dependable starts.

Specifications

Part type: Flame sensor / flame-rectification rod
OEM part number: 0130F00010S
Function: Flame proving for hot-surface ignition system
Application: Condensing gas furnace ignition circuit
Compatibility: Goodman / Amana ACVC961005CNAA and related 96% AFUE furnaces
Brand: Genuine Goodman OEM

OEM vs. Generic

This genuine Goodman OEM sensor matches the original rod length, bend, ceramic insulator, and mounting bracket so it seats correctly in the burner flame. Generic flame sensors frequently position the rod incorrectly, producing weak or unstable microamp readings and repeat lockouts. OEM fit means a clean, reliable flame signal.

Installation

Difficulty: Easy (1/5). Remove one mounting screw, unplug the spade terminal, and install the replacement — typically under 10 minutes. Shut off power and gas before servicing. After installation, verify a steady flame-sense microamp reading if you have a meter.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Flame Sensor for ACV...

$32.34

Frequently Asked Questions

Does this Flame Sensor fit my Goodman ACVC961005CNAA — 0130F00010S?

Yes. This is the factory-specified OEM flame sensor for the Goodman ACVC961005CNAA — 0130F00010S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the flame sensor on my Goodman ACVC961005CNAA — 0130F00010S?

Difficulty: Easy (10–15 min)
Step 1: Turn off power/gas. Step 2: Open furnace panel. Step 3: Locate flame sensor rod near burners. Step 4: Remove single mounting screw. Step 5: Clean rod with 400-grit sandpaper until shiny (or replace). Step 6: Reinstall and tighten. Most common furnace repair — saves $150–$300 vs technician.

My furnace lights then shuts off after a few seconds. Why?

Furnace lights then shuts off after 3–10 seconds = dirty flame sensor in 90% of cases. The sensor can’t detect flame through oxidation buildup. Fix: clean with 400-grit sandpaper (free, 15 min). If cleaning doesn’t work, replace the sensor.

Is this flame sensor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman flame sensor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu